中文版 ENGLISH
LED Digital Strip
  APA102 LED Strip
 SK9822 LED Strip
 WS2813 LED Strip
 WS2812B LED Strip
 SK6812 LED Strip
 DMX512 LED Strip
 WS2811 LED Strip
 LPD8806 LED Strip
 Digital RGBW LED Strip
 SK6822 LED Strip
 WS2801 LED Strip
 APA104 LED Strip
 UCS9812 LED Strip
LED Module Light
3D SPI LED TUBE
LED Controller
LED CHIP
LED Panel
LED Ring
Normal led strip
Digital LED Strip Connector
Please enter the keywords:
Products Current location: Home >> Products >> LED Module Light
12mm ws2811 led pixel string


Description:

Ø Superbright SMD top LED & viewing angle, high brightness output, no spot and shadow.
Ø Colors can be chosen as Full color
Ø Low power consumption & operating voltage, safe and energy-saving.
Ø With IP67 protection rating.
Ø Solid-state, high shock or vibration resistant, long lifetime, more than 50000 hours.
Ø Easy installation with mounting holes and 3M adhesive tape on the back.
Features:
ICRGB module with W2801,ws2811 ipd8806
  • individually Control
  • Programable & SD controller
  • DMX 512 Controllalbe
  • Madrix compatible
  • IP67, Water-proof protection
  • Easy installation (two options: screw fixed, or 3M double side adhesive tape)
Parameter



input side: is the side with IC

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs

E       ach dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller.


The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED

12mm diameter (0.45") 75mm deep (1.5")

100mm distance

50 pieces per strand

These pixels use a WS2811 chip for full 24 bit color

5V power, 60mA maximum per pixel (LED on full white)

2-pin SPI-like protocol

WS2801 Datasheet for the chip inside each pixel

Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)

APA104 LED


DIS03(3-6),SEL03(3-6),IMG03(3-5),CUR03(03-04),5D28F,QMU03(3/2),AMD03(3-3),03661(2/25),INC02(2-28),WIN02(2-2)